Ortofon Cadenza Bronze technical data
The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. Field Stabilizing Element FSE, is used for optimal linearity especially during complex crescendo passages.
Cadenza Bronze is a true high-end reference cartridge, conveying music with supreme precision, impact and dynamics. Its stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions.
|
Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. |
400 μV |
| Channel balance at 1 kHz |
< 1 dB |
| Channel separation at 1 kHz |
> 24 dB |
| Channel separation at 15 kHz |
> 20 dB |
| Frequency range at - 3dB |
20 - 55 kHz |
| Frequency response 20 Hz - 20 kHz |
+1,5 |
| Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
| Compliance, dynamic, lateral |
12 µm/mN |
| Stylus type |
Nude Ortofon replicant,, conical aluminium |
| Stylus tip radius |
r/R 5/100 µm |
| Tracking force range |
2,2-2,7 g (22-27 mN) |
| Tracking force, recommended |
2,5 g (25 mN) |
| Tracking angle |
23° |
| Internal impedance, DC resistance |
5 Ohm |
| Recommended load impedance |
50-200 Ohm |
| Cartridge body material |
Stainless steel / Aluminium |
| Cartridge colour |
Bronze/Black |
| Cartridge weight |
10,7 gram |
*) Typical value
|
Ortofon A/S | Stavangervej 9 | DK-4900 Nakskov | Denmark | Tel. +45 54 91 19 15 | Fax +45 54 91 19 11 |