OM Pro S pre-mounted on SH-4 Black

OM PRO S premounted

The OM Pro S on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.
€99,00

OM Pro S mounted on SH-4 Black

The OM Pro S on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. 

Features:

  • Universal mount fitting a wide range of S-shaped tonearms
  • Correct Baerwald alignment with the major part of tonearms with universal mount  
  • Spherical stylus minimizes scratching
  • Solid cantilever can survive hectic activity at the turntable

The OM Pro S is a consistent performer and a fine all-arounder!

Specifications

  • Channel balance at 1 kHz
    2 dB
  • Output voltage at 1 kHz, 5cm/sec
    5 mV
  • Channel seperation at 1 kHz
    20 dB
  • Channel seperation at 15 kHz
    15 dB
  • Tracking ability at 315Hz at recommended tracking force
    70 μm
  • Compliance, dynamic, lateral
    7 μm/m N
  • Stylus type
    Spherical
  • Stylus tip radius
    R 18 μm
  • Tracking force range
    3 - 5 g
  • Tracking force, recommended
    4 g
  • Tracking angle
    20°
  • Internal impedance, DC resistance
    750 Ohm
  • Cartridge weight
    5,0 g
  • Recommended load resistance
    47 kOhm
  • Internal inductance
    450 mH
  • Recommended load capacitance
    200-600 pF
  • Replacement stylus

Explore our premium selections below

Seeking an enhanced experience?