OM Q.Bert on SH-4 Black

More
  • Features and applications
  • Technical data
  • Configurations

From

€145.00

OM Q.Bert on SH4 Black.jpg

OM Q.Bert pre-mounted on SH-4 Black headshell

The OM Q.Bert on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. 

Features:
• Universal mount fitting a wide range of S-shaped tonearms   
• Ultra high output
• Low wear characteristics 

Tailored specifically for scratch, the OM Q.Bert provides unrivaled tracking ability and sonic characteristics.

Technical Data

  • Stylus Type Spherical
  • Tracking Force 3.0 g
  • Output Voltage 11 mV
  • Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. -  11 mV
Channel balance at 1kHz  -  1,5 dB
Channel separation at 1kHz -  22 dB
Tracking ability at 315 Hz at recommended tracking force -  90 μm
Compliance, dynamic lateral -  12 μm/m N
Stylus type -  Spherical
Stylus tip radius - R 18 μm
Tracking force range -  2 - 4 g
Tracking force recommended -  3 g

Tracking angle -  20°
Internal impedance, DC resistance -  1.680 Ohm
Internal inductance -  920 mH
Recommended load resistance -  47 kOhm
Recommended load capacitance -  200-400 pF
OM cartridge weight incl. extra weight -  5 g
Replacement stylus unit -  Q.Bert

For information about set-up and alignment, stylus care and lifetime, break-in time, troubleshooting check out our DJ FAQ.

Download the DJ range cartridges userguide

OM assemblies on SH-4 headshell.png Play
OM Q.Bert on SH4.jpg

OM Q.Bert premounted on SH-4 Black

Find your local authorised Ortofon dealer